MIRICS MSi2500 - SDPPlay

General discussions
Post Reply
beefheartvliet
Posts: 1
Joined: Sat Aug 22, 2015 10:39 pm

MIRICS MSi2500 - SDPPlay

Post by beefheartvliet » Sat Aug 22, 2015 10:48 pm

HI,

I've spent quite a few hours this week trying to get SDRPlay working in Ubuntu. Today I finally managed to get through the guide that is posted here.

http://www.sdrplay.com/docs/Mirics_SDR_ ... e_r2p0.pdf

However, when I start GQRX, I don't see SDRPlay as an usable device., but I do see MIRICS MSi2500.

Am I missing Something ? what else might I need to do? adding MSi2500 to blocklist.conf maybe ?

Any help would be appreciated, I can't give up on this, else that's a week of my life down the drain :-)

Many Thanks in anticipation

Pete
Last edited by beefheartvliet on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

sdrplay
Posts: 978
Joined: Wed Jan 07, 2015 7:58 am

Re: MIRICS MSi2500 - SDPPlay

Post by sdrplay » Sun Aug 23, 2015 1:16 am

If you don't see SDRplay but you do see miri then that's using the wrong library. The miri library is an unofficial library that will not control all of the bands for the RSP - you need to make sure gr-osmosdr has been successfully compiled with the SDRplay functionality enabled.

Best regards,

SDRplay Support
Last edited by sdrplay on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

Post Reply