SDRPlay with SDR Console Version 2.3 2194

Post information or questions regarding SDRplay products here
Post Reply
jimcking2
Posts: 2
Joined: Tue Sep 15, 2015 6:27 pm

SDRPlay with SDR Console Version 2.3 2194

Post by jimcking2 » Tue Sep 15, 2015 6:36 pm

I am having the same problem mentioned previously with SDRPlay about it stopping receiving signals after a band change until it is restarted. I am trying to use SDR Console Version 2.3 2194. It works fine with HDSDR and SDR#.

I really like SDR Console but it is not really obvious when it stops receiving. Another forum indicated this was fixed with the version I have but it is still a problem with me. Any suggestions other than restarting SDRPlay every time I change bands?

Thanks,

Jim K.
Last edited by jimcking2 on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

jon
Posts: 433
Joined: Tue Jan 06, 2015 10:48 am

Re: SDRPlay with SDR Console Version 2.3 2194

Post by jon » Tue Sep 15, 2015 9:16 pm

We have a call booked with Simon Briwn of SDR Console this week to address this issue
Last edited by jon on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

DaveB
Posts: 142
Joined: Sun Feb 01, 2015 6:04 pm

Re: SDRPlay with SDR Console Version 2.3 2194

Post by DaveB » Sat Sep 26, 2015 1:31 pm

Hi,

Is Simon implementing automatic I/Q correction for the SDRPlay - or possible manual phase/amplitude setting to eliminated mirror images of strong signals?
Last edited by DaveB on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

DaveB
Posts: 142
Joined: Sun Feb 01, 2015 6:04 pm

Re: SDRPlay with SDR Console Version 2.3 2194

Post by DaveB » Mon Sep 28, 2015 5:32 pm

Also when talking to Simon Brown could you hint that an unfiltered audio output at 192kHz sample rate would be very much appreciated by FM-Dxer's both on the Main console - and especially on the I/Q Data Analyser so that an external RDS decoder (RDSSpy) can be used for in-depth analysis. Your suggesting it would carry more weight.

Thanks
Last edited by DaveB on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

Post Reply