Is it safer to Transmist?

Discussions about everything to do with SDRuno
4s6ryd
Posts: 2
Joined: Sat May 05, 2018 7:22 am

Is it safer to Transmist?

Postby 4s6ryd » Sat May 05, 2018 7:27 am

Thank you for getting me in.
I have Yeasu FTDx-3000D and RSP2Pro Port A connected to the Rx Out of the rig. Using OmniRig and receiving and controlling the rig works perfect.
My worry is, can I transmit (have a QSO) while the SDR is still connected to the rig and the computer? I use 100W and gap between the SDR and the radio is about 3 feet.
Is there anything else I need to setup?
Last edited by 4s6ryd on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

mikexeno
Posts: 84
Joined: Wed Jul 08, 2015 3:18 am

Re: Is it safer to Transmist?

Postby mikexeno » Sun May 06, 2018 5:12 pm

The RX out port of the FTDX3000 will go to GND when you keyup. The RSP is 100% safe when you tether to that port (or the IF out port)

Reason: No reason

4s6ryd
Posts: 2
Joined: Sat May 05, 2018 7:22 am

Re: Is it safer to Transmist?

Postby 4s6ryd » Mon May 07, 2018 3:19 am

Thank you Mike
I will start transmitting then.

Cheers
73
Last edited by 4s6ryd on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason


Return to “SDRuno”

Who is online

Users browsing this forum: No registered users and 1 guest