RSP1A & Cubic SDR

Post your feedback here
KD4KO
Posts: 1
Joined: Tue Jul 17, 2018 6:34 pm

RSP1A & Cubic SDR

Postby KD4KO » Tue Jul 17, 2018 6:56 pm

I received my SDRplay yesterday. I tuned in a strong SSB signal on 20 meters, switched the antenna to the RSP1A. The signal was hardly noticeable on the waterfall, even when I raised the gain. Switched antenna back to receiver and the signal SSB was still strong.
I'm open for suggestions!!
Last edited by KD4KO on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

sdrplay
Posts: 833
Joined: Wed Jan 07, 2015 7:58 am

Re: RSP1A & Cubic SDR

Postby sdrplay » Tue Jul 17, 2018 7:52 pm

It's probably the gain setting, by default it will be 3 or 4, change it to 0

If you are still having problems, posting a screenshot here (include the device selection panel so we can see the settings) will help.

Best regards,

SDRplay Support

Reason: No reason

UT4NJ
Posts: 8
Joined: Thu Sep 27, 2018 2:14 pm

Re: RSP1A & Cubic SDR

Postby UT4NJ » Fri Sep 28, 2018 5:02 am

Hi! Are protective diodes interestingly costed on the entrance of SDRPLAY RSP1A me?
Last edited by UT4NJ on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

sdrplay
Posts: 833
Joined: Wed Jan 07, 2015 7:58 am

Re: RSP1A & Cubic SDR

Postby sdrplay » Fri Sep 28, 2018 4:59 pm

Yes there are ESD protection diodes on the RSP inputs.

Best regards,

SDRplay Support

Reason: No reason

UT4NJ
Posts: 8
Joined: Thu Sep 27, 2018 2:14 pm

Re: RSP1A & Cubic SDR

Postby UT4NJ » Fri Sep 28, 2018 6:35 pm

Many thanks! Successes!
Last edited by UT4NJ on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

UT4NJ
Posts: 8
Joined: Thu Sep 27, 2018 2:14 pm

Re: RSP1A & Cubic SDR

Postby UT4NJ » Sun Sep 30, 2018 5:08 pm

Hi! Say please, where it is possible to purchase SDRPLAY RSP1A, I live in Ukraine. Many thanks. With kind regards Dmitry. UT4NJ.
Last edited by UT4NJ on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

Tech_Support
Posts: 353
Joined: Mon Jun 01, 2015 7:00 pm

Re: RSP1A & Cubic SDR

Postby Tech_Support » Sun Sep 30, 2018 6:16 pm

Hello Dmitry,
You can purchase direct via our website: https://www.sdrplay.com/purchase/

We do ship to Ukraine.

Sincerely

Tech_Support

Reason: No reason

UT4NJ
Posts: 8
Joined: Thu Sep 27, 2018 2:14 pm

Re: RSP1A & Cubic SDR

Postby UT4NJ » Mon Oct 01, 2018 4:28 am

Thank you!
Last edited by UT4NJ on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

UT4NJ
Posts: 8
Joined: Thu Sep 27, 2018 2:14 pm

Re: RSP1A & Cubic SDR

Postby UT4NJ » Tue Oct 02, 2018 6:26 am

Say please, in SDRPLAY RSP1A mode of Bias - T how to disconnect / to include, or he does not become disconnected? Thank you!

Reason: No reason


Return to “New Users' experiences”

Who is online

Users browsing this forum: No registered users and 5 guests