I have rebuilt soapy, the soapy module, and all the things (aaaaaaalllll the things) that are required to build Cubic. All seem to build and install okay, except, Cubic jump off a building when it sees the SDRPlay.
I get this from the console:
Code: Select all
Gtk-Message: Failed to load module "canberra-gtk-module" Gtk-Message: Failed to load module "topmenu-gtk-module" Loading:: configuration file '/home/ehidle/.CubicSDR/config.xml' (CubicSDR:31136): IBUS-WARNING **: Unable to load /var/lib/dbus/machine-id: Failed to open file '/var/lib/dbus/machine-id': No such file or directory Audio Device #0 PulseAudio Default Output? Yes Default Input? Yes Input channels: 2 Output channels: 2 Duplex channels: 2 Native formats: 16-bit signed integer. 32-bit signed integer. 32-bit float normalized between plus/minus 1.0. Supported sample rates: 8000hz 16000hz 22050hz 32000hz 44100hz 48000hz 96000hz Available vertical sync SwapInterval functions: glxSwapIntervalEXT: No DRI2SwapInterval: No glxSwapIntervalMESA: No glxSwapIntervalSGI: No No vertical sync swap interval functions available. Loaded font 'Bitstream Vera Sans Mono' from '/home/ehidle/software/CubicSDR-0.2.4/build/x64/fonts/vera_sans_mono12_0.png', parsed 255 characters. Loaded font 'Bitstream Vera Sans Mono' from '/home/ehidle/software/CubicSDR-0.2.4/build/x64/fonts/vera_sans_mono16_0.png', parsed 255 characters. Loaded font 'Bitstream Vera Sans Mono' from '/home/ehidle/software/CubicSDR-0.2.4/build/x64/fonts/vera_sans_mono18_0.png', parsed 255 characters. Loaded font 'Bitstream Vera Sans Mono' from '/home/ehidle/software/CubicSDR-0.2.4/build/x64/fonts/vera_sans_mono24_0.png', parsed 255 characters. Loaded font 'Bitstream Vera Sans Mono' from '/home/ehidle/software/CubicSDR-0.2.4/build/x64/fonts/vera_sans_mono27_0.png', parsed 255 characters. SDR enumerator starting. SoapySDR init.. API Version: v0.7.0 ABI Version: v0.7 Install root: /usr/local Loading modules... linux; GNU C++ version 5.4.0 20160609; Boost_105800; UHD_003.010.003.000-0-unknown Available factories...airspy, audio, bladerf, hackrf, miri, null, osmosdr, remote, rfspace, rtlsdr, sdrplay, uhd usb_claim_interface error -6 default_input = True default_output = True device_id = 0 driver = audio label = PulseAudio Make device 0 device_id=0 origin=https://github.com/pothosware/SoapyAudio driver = miri label = Mirics MSi2500 default (e.g. VTX3D card) miri = 0 Make device 1 Using device #0: Mirics MSi2500 default (e.g. VTX3D card) _mirisdr_alloc_async_buffers Lost samples! Lost samples! OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO/code] And the zeroes continue indefinitely until I kill the process. The only thing I see in here that I can envision might be an issue here is the "usb_claim_interface error -6" message. I can't see that anything else is trying to use the device, though. Any guidance? Thanks in advance!