Laptop Settings for SDRuno

Discussions about everything to do with SDRuno
Post Reply
Jumbo
Posts: 3
Joined: Sun Feb 03, 2019 6:44 am

Laptop Settings for SDRuno

Post by Jumbo » Mon Feb 04, 2019 5:55 pm

Hello,
I am considering the purchase of a laptop.
What would these features be for working with SDRuno and RSP1A:
Processor: Intel I5, I7? Clocked at ... .. GHz?
Ram ... Go?
Screen size 15, 17 ...... inches
Nvidia graphics card type?
Etc ... ..

Thank you for your opinions
Jumbo
Last edited by Jumbo on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

g1hbe
Posts: 489
Joined: Sat Jan 17, 2015 3:28 pm
Location: Cheshire, UK

Re: Laptop Settings for SDRuno

Post by g1hbe » Mon Feb 04, 2019 10:19 pm

I've used several laptops, including an elderly P6200, an i3 and an i5, all clocked between 2.1 and 2.4 GHz and from 1 to 8 GB of memory. All have 15 inch screens and standard Intel HD 5500-type onboard graphics. All work fine, although the old P6200 could stutter a bit above 6 MHz b/w. The rest of them all work well right up to 10 MHz width and I can even surf the net at the same time. I've never used more than one VRX though, so I can't advise on that.

Reason: No reason
Andy

Mike2459
Posts: 318
Joined: Mon Jul 24, 2017 8:24 pm

Re: Laptop Settings for SDRuno

Post by Mike2459 » Wed Feb 06, 2019 9:42 am

Re: Screen Size
The bigger the better, SDRuno is a real estate hog. I would recommend a dual monitor setup.

Reason: No reason

Post Reply