Search found 18 matches

by JJ_in_TN
Wed May 22, 2019 1:05 pm
Forum: SDRplay related
Topic: RSP2 became deaf
Replies: 7
Views: 271

Re: RSP2 became deaf

A couple of questions: Is the signal path exactly the same to the RSP and the Yaesu? Same cable, same adapters etc? Try replacing any that differ even if they look fine. Does the problem exist at HF? At VHF? or only at UHF? Did the failure happen while you were listening, or between sessions? Maybe ...
by JJ_in_TN
Thu May 02, 2019 3:03 pm
Forum: SDRuno
Topic: Ignore silence during recording?
Replies: 3
Views: 760

Re: Ignore silence during recording?

Until SDRuno implements this feature, if you are on Windows you can use Audacity open source software. Under the Transport menu select Transport Options > Sound Activated Recording. You can then set the level at which recording is triggered.

https://www.audacityteam.org/
by JJ_in_TN
Thu Mar 21, 2019 9:57 pm
Forum: Spectrum Analysis
Topic: Feedback for version 1.0a here
Replies: 98
Views: 14391

Re: Feedback for version 1.0a here

Thank you again, this is truly fantastic software. Here I show my return loss for a homebrew 443 MHz antenna I made in 5 min from some solid wire and a BNC connector. I am using the wide band noise generator and mini-circuits directional coupler method. http://w0faa.net/returnloss_sml.jpg
by JJ_in_TN
Thu Mar 21, 2019 7:25 pm
Forum: Spectrum Analysis
Topic: Feedback for version 1.0a here
Replies: 98
Views: 14391

Re: Feedback for version 1.0a here

Thank you tech support, report confirmed as operator ignorance. It's been a few years.
by JJ_in_TN
Thu Mar 21, 2019 6:51 pm
Forum: Spectrum Analysis
Topic: Feedback for version 1.0a here
Replies: 98
Views: 14391

Re: Feedback for version 1.0a here

Follow up: On other frequencies with different settings this effect is much less pronounced but still occurs. Looking at the raw data on the screen it appears there may be, for whatever reason, more negative excursions in my noise than positive ones which would of course skew the readings. I don't k...
by JJ_in_TN
Thu Mar 21, 2019 6:06 pm
Forum: Spectrum Analysis
Topic: Feedback for version 1.0a here
Replies: 98
Views: 14391

Re: Feedback for version 1.0a here

This software is more exciting by the minute as I try each function, but I have a question as to how the average function works in a trace. I am consistently seeing the "Average" trace showing a lower level than the "apparent average" I see on the raw trace. My expectation would ...
by JJ_in_TN
Thu Mar 21, 2019 5:17 pm
Forum: Spectrum Analysis
Topic: Feedback for version 1.0a here
Replies: 98
Views: 14391

Re: Feedback for version 1.0a here

Thank you thank you thank you! I started checking every 12 hours and suddenly surprise, available for download! Thank You! Feedback: If I change frequency by moving the cursor to the input box and typing a new frequency, then I press Enter, Windows emits the Asterisk sound. Is that intended? I would...
by JJ_in_TN
Wed Mar 20, 2019 1:59 pm
Forum: SDRplay related
Topic: Remotely Reset/Reboot RSP2Pro
Replies: 2
Views: 736

Re: Remotely Reset/Reboot RSP2Pro

Perhaps you could use Device Manager to disable and re-enable the RSP device when you are remotely controlling?
by JJ_in_TN
Tue Mar 19, 2019 3:51 pm
Forum: SDRplay related
Topic: Using your SDRPlay RSPx as a Spectrum Analyzer for testing
Replies: 9
Views: 8761

Re: Using your SDRPlay RSPx as a Spectrum Analyzer for testing

With that version of SDR# getting a bit long in the tooth and all the improvements to SDRuno and other compatible software, is there any reason to use that old version of SDR# in 2019? Can SDR# do anything the others can't?
by JJ_in_TN
Tue Mar 19, 2019 4:22 am
Forum: SDRuno
Topic: V 1.3 ...W10 .. Recording With a Schedule
Replies: 1
Views: 263

Re: V 1.3 ...W10 .. Recording With a Schedule

As a work around if you are running Windows, I suggest you install Audacity and try turning on audio activated recording. When your scheduled receive starts it should kick in and record, but I have not verified this.

Go to advanced search