SDRplay Community Forum

ADC Overload means the ADC is getting too much signal. Couple of ways to work around it. Best way is to turn down the RF Gain until the Warning goes away. You can also narrow the bandwidth so you do not get as much signal from adjacent bands of adjacent signals. Sounds like maybe your antenna degrad...

OK I have had my RSP3Pro for a few days playing with it trying to figure out how to set up Sample Rate vs Decimation and how it effects SNR and Sensitivity. Example if I set SR = 10 Mbs and Decimate by 1, and enter 5.0 Mhz I see 0 to 10 Mhz BW and 5 Mhz Center. Basically with that I can see the AM B...

There are several ways to use your TS-590S and an SDRplay. This document gives you an overview... https://www.sdrplay.com/wp-content/uploads/2017/10/171011PanadapterGuide.pdf Well what a pleasant surprise. I clicked the link and read the document and found another link in the document going to a Yo...

OK I have read a few threads here and know basically how to interface the two together. But what I have not seen anything that addresses my concerns. The radio has a 100 Watt transmitter and I am concerned when I transmit I could overload the SDRPlay front end. Is that a real concern or not. If it i...

Greetings everyone. I thought I would introduce myself. My name is Dereck and I have been a professional engineer for about 40 years and an Extra Class ham radio operator. Started my career out of college as an electric utility as a Transmission Engineer for about 5 years before moving on to Communi...