SDRplay Community Forum

OP25 does it work on SDRUno?

https://i.imgur.com/mvbLi6v.jpg Added this cable and have the SDRplay in another room about 20ft away, works well TRIPP LITE USB 2.0 Hi-Speed Active Repeater Cable A/B - M/M 480Mbps, 50' (U042-050) Elevation Grounded UTC Local Level Band Frequency Station 5ft high No 0000 1823 +35 49m 5.920.000 Wor...

Ok, As a test fit, I threw the antenna up about 10ft in a tree , so the antenna is horizontal about 5 ft off the ground. No ground yet. Connection prototype is holding well. Heard Grid: EN61gn utc local level band freq station 1800 Noon 6.5 22m 13.670.000 Africa 1800 Noon 8 25m 11.930.000 Radio Haba...

Thank you glovisol. I was hoping the wideband 9:1 transformer wound on a binocular core would address this. https://i.imgur.com/qsYH4xx.jpg Just pulled out the Jackite Fiberglass Telescoping Kite Pole for the antenna, it will be a sloper. I collapsed the top 3 sections and tape them so it doesnt bre...

This is the feed line


The LNR Precision Par EndFedZ EF-SWL Antenna

Changed from solid 12ga to 16awg stranded speaker wire fit in holes better and might have better connection. CHECK that 16awg would not hold in the A/V unit. Used 6 strands twisted together from the 12 ga holds much better https://i.imgur.com/qgojxzv.jpg Installing antenna over the next few days, as...

OK, I present a experimental prototype connection solution. Some rummaging in the radio parts box revealed 12 gauge solid and stranded copper wire. Will the connection work? how well? we shall see. https://i.imgur.com/cxE9Jg1.jpg BNC male to UHF female SO-239 SO239 and BNC Female Jack to AV 2-Screw ...

Here are the types of connections I have found on the web. So $200 for the SDRplay $100 for the antenna $30 for USB cable... all quality products and now I have to Jury rig a whip axx connection to the SDRplay? It just doesn't sit right with me and I hold a extra class license and enjoy experimentin...

I have the RSP2pro and would like to attach the LNR Precision Par EndFedZ EF-SWL antenna to the HIZ port.
This antenna has a built in 9-1 balun already and attaches to a PL-259 connector.
Any suggestions?

Thank you