Search found 217 matches

by Roger
Tue Jan 02, 2018 9:53 pm
Forum: New Users' experiences
Topic: New User
Replies: 10
Views: 17859

Re: New User

There is nothing better than SDRUno for doing Spectrum Analyzer work with an RSP. That is because they have gone to considerable effort to make sure that the dBm levels are accurate as the IF and RF levels are changed by the user or AGC algorithm. All the other packages (SDR-Console, HDSDR, CubicSDR...
by Roger
Tue Jan 02, 2018 9:33 pm
Forum: SDRuno
Topic: SDRUno and Virtual Audio Cable
Replies: 4
Views: 9761

Re: SDRUno and Virtual Audio Cable

I installed VAC this evening and followed the instructions on the YouTube video posted on SDRPlay’s channel. ....... I would very much like to decode digital modes, but it seems VAC isn’t playing nice with my machine, any ideas? Which VAC did you use. I use VB Cable (free) and it works perfectly wi...
by Roger
Tue Jan 02, 2018 9:26 pm
Forum: General
Topic: Is a coax switch adequate?
Replies: 6
Views: 8974

Re: Is a coax switch adequate?

Your transmitter has a max power output of 100W or 50 dBm The RSP2 has a maximum input of 0 dBm continuous or 10 dBm over a short period on all the ports. So to be safe your switch needs 50-0= 50 dB of isolation. I have a quality Daiwa switch which shorts the unused inputs to ground and it claims to...
by Roger
Sun Dec 31, 2017 5:03 am
Forum: SDR Antennas
Topic: Very first setup
Replies: 3
Views: 9091

Re: Very first setup

Discones work well and they are not expensive. Good for VHF and UHF but some people use them on lower frequencies. When it comes to HF it is a tradeoff between physical size and performance. Bigger is better. Limited space antennas can work well if they are properly designed. We are at the bottom of...
by Roger
Sun Dec 31, 2017 4:47 am
Forum: SDRplay related
Topic: Newbie
Replies: 2
Views: 5617

Re: Newbie

1) I'm wanting to listen to HF amateur bands, HF Oceanic traffic and VHF Air Band. I'm happy that I'll have to use two different antennas, but what receiver would be best. If there is only a single antenna port how would I switch antennas? It all depends on what you mean by Best. The RSP1A and RSP2...
by Roger
Sat Dec 30, 2017 4:37 am
Forum: General
Topic: Using RSP Pro 2 for CW RTTY decoding?
Replies: 10
Views: 18740

Re: Using RSP Pro 2 for CW RTTY decoding?

You might try watching this video which shows step by step how to get SDRuno to pass sound to Fldigi for decode. It shows PSK31 being decoded but FLdigi also does RTTY, CW etc. . Note FLDigi will not track your receiver frequency because a Virtual Com port...
by Roger
Fri Dec 29, 2017 8:27 pm
Forum: General
Topic: RSP2 RF Protection Question
Replies: 11
Views: 21274

Re: RSP2 RF Protection Question

Jim, I can't imagine that two antennas that close will be able to operate in full duplex without a good RF filter on the receive side. Just too much RF coming into the front end of any receiver. With any broadband SDR, like the SDRPlay, you will still want some front end protection. If you want to o...