Search found 499 matches

by Tech_Support
Tue Apr 09, 2019 5:41 pm
Forum: SDRuno
Topic: api_Service not Responding. What To Do, Please ?
Replies: 10
Views: 46785

Re: api_Service not Responding. What To Do, Please ?

Hello Heinrich,
Can you open up a support ticket at www.sdrplay.com/support? There is some debug data that we would like to collect.

Sincerely

Tech_Support
by Tech_Support
Tue Apr 09, 2019 1:38 pm
Forum: SDRuno
Topic: RX Output device - make the choice more immediate
Replies: 4
Views: 15439

Re: RX Output device - make the choice more immediate

Hello Alessandro,
The process of changing the Audio Output Device has been simplified in release 1.31 and it is now no longer necessary to stop and restart the stream.

Sincerely

Tech_Support
by Tech_Support
Sat Apr 06, 2019 3:14 pm
Forum: SDRplay related
Topic: SAP and DEC
Replies: 1
Views: 9488

Re: SAP and DEC

Hello Sabrina1984, This simply means you have selected one of the band framing buttons. This puts you in Low IF mode and removes both of the sample rate and decimation options. To get both back, simply un-frame the band and then open up the Main Panel settings (SETT button) and select Zero IF for th...
by Tech_Support
Thu Apr 04, 2019 1:02 pm
Forum: SDRplay related
Topic: Dump 1090 issues
Replies: 6
Views: 19766

Re: Dump 1090 issues

I think you slightly misunderstand me. What I was saying is that if you want to use dump1090 AND SDRuno at the same time, you will need either two RSPs or a RSPduo as each software package requires a single tuner.

You can use dump1090 on its own with ANY RSP.

Sincerely

Tech_Support
by Tech_Support
Sun Mar 31, 2019 9:12 pm
Forum: SDRuno
Topic: Not sure what's going on with 2 meter framing button
Replies: 2
Views: 12019

Re: Not sure what's going on with 2 meter framing button

This was an error in the re-definition of the band framing buttons. It'll be fixed on the next release.

Sincerely

Tech_Support
by Tech_Support
Sat Mar 30, 2019 5:11 pm
Forum: SDRplay related
Topic: Dump 1090 issues
Replies: 6
Views: 19766

Re: Dump 1090 issues

Dump1090 is a standalone program and does not use SDRuno. Ay attempts to run both programs at the same time will not work unless you are using a RSPduo.

Sincerely

Tech_Support
by Tech_Support
Fri Mar 29, 2019 6:10 pm
Forum: New Users' experiences
Topic: S-METER READING
Replies: 15
Views: 45119

Re: S-METER READING

Bas, The S-meter gives a measurement of the total signal power within the demodulation bandwidth. It is incapable of distinguishing between wanted signal and interference within the same bandwidth and so it is perfectly possible to have a reading of s9+20 and have a barely audible signal. S-meters g...
by Tech_Support
Fri Mar 29, 2019 7:33 am
Forum: SDRuno
Topic: SDRuno automatically resets Zero IF to Low IF on every single band change
Replies: 5
Views: 18422

Re: SDRuno automatically resets Zero IF to Low IF on every single band change

Low IF is a better option for the band presets for the HF bands and lower as it results in fewer spurious mixing products from the block converter that is used for covering HF. This is explained in the following application note: https://www.sdrplay.com/docs/SDRplay_Optimising_Performance_RSP1A_LF_M...
by Tech_Support
Thu Mar 28, 2019 9:52 pm
Forum: SDRuno
Topic: Scanning UHF Freqs appears not to work ?
Replies: 3
Views: 13205

Re: Scanning UHF Freqs appears not to work ?

Hello Stevejerome, You have quite a low gain setting. Why did you set it so low? it will raise the noise floor significantly and degrade the SNR. I cannot see any signals that are greater than your threshold level in your SP1 window. I would try increasing your gain and lowering your threshold. You ...
by Tech_Support
Thu Mar 28, 2019 7:04 pm
Forum: SDRuno
Topic: Scanning UHF Freqs appears not to work ?
Replies: 3
Views: 13205

Re: Scanning UHF Freqs appears not to work ?

Hello Stevejerome
Have you set the threshold value correctly?

Post a screenshot of your configuration Window along with your SP1 display and people may be able to advise you.

Sincerely

Tech_Support