RSP1 vs RSP1A using SDR Console V3
Posted: Fri Feb 16, 2018 6:08 pm
Greetings,
I just received the RSP1A and used it. I have also the previous RSP1 and I compared the two using SDR-Console V3. The same AM station signal at 5.955 MHz with RSP1 is at -49 - -50dBm average, whereas using RSP1A the signal is at -71 - 72dB avergage.
Settings for RSP1: RF Gain = Maximum, IF Gain = -45 dB (Manual), Bandwidth = 8 MHz.
Settings for RSP1A: RF Gain = 0 Max, IF Gain = -40 dB (Manual), Bandwidth = 8 MHz.
How can this happen? Am I doing something wrong?
RSP1 image:
https://drive.google.com/file/d/1qkkIE6 ... K94YvQsSB/
RSP1A image:
https://drive.google.com/open?id=1b56bW ... j5HR-VIpRS_-
This behavior is the same on all bands from 1kHz to 1GHz.
Any response will be highly appreciated.
Best regards
I just received the RSP1A and used it. I have also the previous RSP1 and I compared the two using SDR-Console V3. The same AM station signal at 5.955 MHz with RSP1 is at -49 - -50dBm average, whereas using RSP1A the signal is at -71 - 72dB avergage.
Settings for RSP1: RF Gain = Maximum, IF Gain = -45 dB (Manual), Bandwidth = 8 MHz.
Settings for RSP1A: RF Gain = 0 Max, IF Gain = -40 dB (Manual), Bandwidth = 8 MHz.
How can this happen? Am I doing something wrong?
RSP1 image:
https://drive.google.com/file/d/1qkkIE6 ... K94YvQsSB/
RSP1A image:
https://drive.google.com/open?id=1b56bW ... j5HR-VIpRS_-
This behavior is the same on all bands from 1kHz to 1GHz.
Any response will be highly appreciated.
Best regards