SDRplay Community Forum

When Im scrolling the frequency on my mouse the band keeps freezing up and cutting out for a second continuously, all bands the same, and happens whether I scroll fast or slow, anyone help me please.

Hello.
I suppose the first question is whether it has done this from day one or if it is a problem that has started after weeks/months of satisfactory operation?
If it's a new installation, then how about a lack of steam in your PC? Old or 'full up' computers can cause this due to poor processor performance or lots of unwanted applications running in the background. How does the processor load look? A high reading is a symptom of lack of power or other apps getting in the way.
Does reducing the sample rate to (say) 2MHz or less help?

This can happen with a wireless mouse when: It's batteries are getting low and/or the receiver is too far away from the mouse.

System and SDR running at around 10% and Im using a USB mouse the problem has been since day one.

Sample rate is at minimum.

" anyone help me please."
How can anyone help you, when you have provided, little to no information on the system you are using? Hell, man you didn't even provide any info of your operating system, or your hardware. If it is too much of a burden on you to at least do this, then take your problem to a professional.

Can you install your system on another computer to see if the problem persists? This kind of laggy behaviour is certainly not normal.

Who the hell do you think you are talking to Mike, I asked a question ..not to receive a lecture thanks

System Config: OS Windows 7 Home Premium 64-bit Service Pack 1
Processor: AMD FX(tm)-4350 Quad Core Processor (4 CPUs)
Memory: 16384MB
Videa Drivers: Radeon(TM) RX 460 Graphics
Running SDR RSP1A on SDRUNO

Is your Windows 7 fully updated? SDR uno runs well on my old W7 laptop, but it wasn't happy until I made sure I had all the new updates.