Page 1 of 1
S meter adjustment ?
Posted: Sun Oct 30, 2016 8:06 pm
by mikebrock
Can the S meter be adjusted?
If it can how?
cheers
Re: S meter adjustment ?
Posted: Sun Oct 30, 2016 9:18 pm
by g1hbe
Main panel (the one with the 'play' button) > SETT (button in top of frame) > CAL.
Most people find the meter reads too high and a setting of -15 to -20 is about right.
Re: S meter adjustment ?
Posted: Sun Oct 30, 2016 9:27 pm
by mikebrock
Perfect - thanks
Re: S meter adjustment ?
Posted: Sat Jan 27, 2018 9:34 pm
by pc2c-Rene
In my case the new ajustment will not store.
When I close the Main Settings box and re-open it the old value returns.
Rene
Re: S meter adjustment ?
Posted: Sun Jan 28, 2018 1:37 pm
by mark.
g1hbe wrote:Main panel (the one with the 'play' button) > SETT (button in top of frame) > CAL.
Most people find the meter reads too high and a setting of -15 to -20 is about right.
Are we talking people that measured with accurate test equipment or they just compared to their other receiver? And is this for all RSP versions or a particular one? I don't run any other SDR software so I have no idea how SDRuno compares in s meter readings to those.
Re: S meter adjustment ?
Posted: Sun Jan 28, 2018 4:54 pm
by Tech_Support
The S-meter in SDRuno is correctly calibrated to IARU standards and maintains accuracy across the full range. The same is not true for many other items of communications equipment. The only requirement for any adjustment is to allow for external amplification or loss.
Sincerely
SDRplay Tech_Support