Notch filters
Posted: Wed Jan 31, 2018 6:15 pm
Using the "on-the-fly" facility in SDRuno for setting notch filters one and two has been most convenient and useful.
However, i have developed a problem, which manifests itself as these filters becoming mutually cancelling...
e.g. Select target emission with notch filter one and bingo! suppressed.
However, upon targeting a second emission with notch filter two, notch filter one is cancelled on emission #1 and suppresses that selected for notch filter two.
The same effect is achieved in whichever order the notches are selected.
I have done a couple of reboots and uno reset to no avail, but not yet "gone the whole hog" of reloading 1.22, which I am currently using.
Any suggestions would be appreciated.
However, i have developed a problem, which manifests itself as these filters becoming mutually cancelling...
e.g. Select target emission with notch filter one and bingo! suppressed.
However, upon targeting a second emission with notch filter two, notch filter one is cancelled on emission #1 and suppresses that selected for notch filter two.
The same effect is achieved in whichever order the notches are selected.
I have done a couple of reboots and uno reset to no avail, but not yet "gone the whole hog" of reloading 1.22, which I am currently using.
Any suggestions would be appreciated.