AUX SP Window
-
- Posts: 2
- Joined: Wed Jan 09, 2019 6:20 pm
AUX SP Window
Hi,
I've just graded to 1.3 and found that after the initial opening of the software and resizing the windows and saving as a new workspace the AUX SP window overlaps the RX window. I've re-installed the software twice and even in default workspace the AUX SP window overlaps the RX window. resizing it to the smallest size makes no difference, it still overlaps in the horizontal plane.
I've just graded to 1.3 and found that after the initial opening of the software and resizing the windows and saving as a new workspace the AUX SP window overlaps the RX window. I've re-installed the software twice and even in default workspace the AUX SP window overlaps the RX window. resizing it to the smallest size makes no difference, it still overlaps in the horizontal plane.
Last edited by Station_Q27 on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Reason: No reason
Re: AUX SP Window
There is an issue we are aware of that affects the re-sizable windows placed on the right side of the display. There is a check to make sure the window X position + the window width do not exceed the display width. Unfortunately the default window width is used instead of the window width stored in the ini file.
The work around for now is to position these re-sizable windows on the left side of the display and we will fix this in the next release.
Best regards,
Andy
The work around for now is to position these re-sizable windows on the left side of the display and we will fix this in the next release.
Best regards,
Andy
Reason: No reason
-
- Posts: 2
- Joined: Wed Jan 09, 2019 6:20 pm
Re: AUX SP Window
All copied and understood.
Cheers
Cheers
Last edited by Station_Q27 on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Reason: No reason
Re: AUX SP Window
I raised this issue yesterday after I discovered that I could no longer fit the RX Control, Main and Aux SP windows across the top of the screen without serious overlap. I contacted HQ and the bug is now on the 'to do' list. Great service once again.
Reason: No reason
Andy