HDSDR w/RSP2 to HRD to a FTDX3000

[W0EOD]

Ok I am in need of little help here, I have my FTDX3000 hooked to my pc via USB, and HRD has always worked just fine, Now I connected my RSP2 and got HDSDR working just fine with the FTDX3000 via Omnirig. HRD is not running at this time.

The issue I am having is getting HDSDR to connect to HRD via DDE to Hrd. I am starting up the 3000, then HRD v6.3, then starting up HDSDR, I go to the HDSDR option, select DDE to HRD and everytime it says failed to connect

Am I missing a setting somewhere? Maybe something in Hrd's settings that's not turned on?

[W0EOD]

Still needing some info on getting this working, HDSDR will not connect to HRD via DDE to HRD setting..

[Harry]

Not sure why you are using DDE. I'm running HDSDR with HRD, SDRplay and my TS-990 using OmniRig and all works just fine. Everything synchs just fine.

[W0EOD]

Harry I am going to assume the 990 has a little bit different interface then the dx3000, how are you getting all 3 to share that same com port? Are you using a Shared serial port software? The reason you use DDe to Hrd is Hrd runs its DDE server at start up and this avoids the com port conflicts.