Detect Signal using GRC and Raspberry pi

General discussions
Post Reply
Hamza.haras
Posts: 1
Joined: Fri Jun 07, 2019 7:50 pm

Detect Signal using GRC and Raspberry pi

Post by Hamza.haras » Fri Jun 07, 2019 7:53 pm

Hi,

I am trying to simply detect specific signal at specific frequency (as a start) then send signal from raspberry pi to arduino to trigger other command.

From my research I found GRC as best option with hackRF one. I got the signal at monitor as below but as I am totally new in GRC I don’t know which blocks can detect the signal, I think the best way is to record the signal in file then detecting it in future using kind of comparison or by measuring the power.

Please help me to choose appropriate blocks to achieve this result.
Attachments
No signal.PNG
No signal.PNG (47.64 KiB) Viewed 9812 times
with Signal.PNG
Signal appeared
with Signal.PNG (51.03 KiB) Viewed 9812 times
Last edited by Hamza.haras on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

Post Reply