WSJT-x on a Raspberry Pi using SDRPlay

[rrobinet]

From the RP image on this site I can run CubicSDR.

However I would like to run WSJT-x on the RP3 and have it use the SDRP as the receiver, but WSJT-x can't find the audio port when I start it. Beyond that, WSJT-x will want to control the rx frequency, which will require additional SDRP driver support.

Can anyone help? Thanks!



pi@SDRPlay:~ $ wsjtx
ALSA lib pcm.c(snd_pcm_open_noupdate) Unknown PCM cards.pcm.front
ALSA lib pcm.c(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear
ALSA lib pcm.c(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe
ALSA lib pcm.c(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side
ALSA lib pcm.c(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround21
ALSA lib pcm.c(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround21
ALSA lib pcm.c(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround40
ALSA lib pcm.c(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround41
ALSA lib pcm.c(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround50
ALSA lib pcm.c(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround51
ALSA lib pcm.c(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround71
ALSA lib pcm.c(snd_pcm_open_noupdate) Unknown PCM cards.pcm.iec958
ALSA lib pcm.c(snd_pcm_open_noupdate) Unknown PCM cards.pcm.iec958
ALSA lib pcm.c(snd_pcm_open_noupdate) Unknown PCM cards.pcm.iec958
ALSA lib pcm.c(snd_pcm_open_noupdate) Unknown PCM cards.pcm.hdmi
ALSA lib pcm.c(snd_pcm_open_noupdate) Unknown PCM cards.pcm.hdmi
ALSA lib pcm.c(snd_pcm_open_noupdate) Unknown PCM cards.pcm.modem
ALSA lib pcm.c(snd_pcm_open_noupdate) Unknown PCM cards.pcm.modem
ALSA lib pcm.c(snd_pcm_open_noupdate) Unknown PCM cards.pcm.phoneline
ALSA lib pcm.c(snd_pcm_open_noupdate) Unknown PCM cards.pcm.phoneline
ALSA lib pulse.c:243:(pulse_connect) PulseAudio: Unable to connect: Connection refused

ALSA lib pulse.c:243:(pulse_connect) PulseAudio: Unable to connect: Connection refused

Cannot connect to server socket err = No such file or directory
Cannot connect to server request channel
jack server is not running or cannot be started
Expression 'parameters->channelCount <= maxChans' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 1514
Expression 'ValidateParameters( inputParameters, hostApi, StreamDirection_In )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 1838

Expression 'parameters->channelCount <= maxChans' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 1514
Expression 'ValidateParameters( inputParameters, hostApi, StreamDirection_In )' failed in 'src/hostapi/alsa/pa_li