Page 1 of 1
Skimmer Server support for SDRPlay RSP's
Posted: Fri Apr 27, 2018 2:44 pm
by n2ic
VE3NEA's Skimmer Server (
http://www.dxatlas.com/skimserver/) now supports the RSP1, RSP1A and RSP2 using the driver at
http://www.kkn.net/~n2ic/SDRPlayIntf.zip . This provides an easy way to get local CW or RTTY spots using your SDRPlay device, and send the spots to the Reverse Beacon Network (
www.reversebeacon.net).
Note that Skimmer Server is supported, but CW Skimmer is not supported.
Steve
Re: Skimmer Server support for SDRPlay RSP's
Posted: Mon Aug 20, 2018 12:53 pm
by DD0VS
Hello Steve, all,
i like to make use of the SDRPlayIntf for CW SkimmerSrv but it is not working.
The logfile says:
2018-08-19 22:06:04.884: iled to locate API registry entry error =
2018-08-19 22:06:04.884: myRSP.LoadApi failed
Helps needed!
vy73
Harald
DD0VS
Re: Skimmer Server support for SDRPlay RSP's
Posted: Fri Sep 28, 2018 6:34 am
by DD0VS
Hello Readers,
meanwhile i updated to the latest SDRplay - API (End of August 18) and to latest SDRPlayIntf (Sept 18).
I got it running with SkimmerServer for CW and RTTY under the following circumstances:
- 192kHz bandwith only
- maximimum of two different bands.
With 3 Bands i got it not running, with less bandwith i got incorrect spots (wrong frequency).
Using 192kHz and 2 Bands everythings is fine and it works for me.
Many Thanks!
vy73
Harald
DD0BS
Re: Skimmer Server support for SDRPlay RSP's
Posted: Thu Feb 21, 2019 9:03 am
by pa8mm
Hello Steve and all,
Is there any plans for adding support for RSPDuo?
Cheers,
Victor, PA8MM