Open wire and grounding?

Useful information regarding antennas for SDR products.
Post Reply
Posts: 22
Joined: Sun Dec 04, 2016 11:17 am

Open wire and grounding?

Post by EastPier » Mon May 22, 2017 1:51 pm

Hi All

I currently have a grounded long wire connected to my RSP2 via an SMA connector - works fine. However, I am about switch over to a 300ohm open wire fed Doublet (1/2 wave on 40m) which I will connect to the Hi-Z port. Do I still need to run a ground wire from the Hi-Z port?

Many thanks.


Reason: No reason

Post Reply