RSP Spectrum analyser software available shortly
Re: RSP Spectrum analyser software available shortly
@Steve
Your SW is running nice on my RSP1 and W10.
Installation went smooth.
Thank you for kind words in "Release notes".
Expecting to have my ERASynth+ in hands soon.
So now some bridge SW must be written in between
Great work
73
Djani
Your SW is running nice on my RSP1 and W10.
Installation went smooth.
Thank you for kind words in "Release notes".
Expecting to have my ERASynth+ in hands soon.
So now some bridge SW must be written in between
![Wink ;)](./images/smilies/icon_e_wink.gif)
Great work
73
Djani
Reason: No reason
-
- Posts: 213
- Joined: Thu Nov 16, 2017 11:06 pm
- Location: Gold Coast, QLD, Australia
Re: RSP Spectrum analyser software available shortly
I'll be interested to hear how you go with the ERASynth, looks interesting.9a4db wrote:Thank you for kind words in "Release notes".
Expecting to have my ERASynth+ in hands soon.
So now some bridge SW must be written in between
Reason: No reason
Re: RSP Spectrum analyser software available shortly
What is the current status on the release of this software? Looking forward to using it and thank you for your contribution.
Last edited by HNRAO on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Reason: No reason
-
- Posts: 213
- Joined: Thu Nov 16, 2017 11:06 pm
- Location: Gold Coast, QLD, Australia
Re: RSP Spectrum analyser software available shortly
It was released for download about 5 days ago. It can be found here:HNRAO wrote:What is the current status on the release of this software?
https://www.sdrplay.com/downloads/
Reason: No reason
Re: RSP Spectrum analyser software available shortly
Plan is to put one RPI in between, two USB ports and translate/emulate your TrackgenSteveAndrew wrote: I'll be interested to hear how you go with the ERASynth, looks interesting.
protocol to "language" known to ERASynth...
Reason: No reason
-
- Posts: 213
- Joined: Thu Nov 16, 2017 11:06 pm
- Location: Gold Coast, QLD, Australia
Re: RSP Spectrum analyser software available shortly
Sounds great. The protocol (such as it is) is listed in the instruction manual. If you need any further information, please let me know. The only change so far, is the addition of a synch output pulse from the Aduino at the beginning of every sweep cycle, but I don't think that will affect what you plan to do. There may be an addition in the form of a simple ACK/NAK handshake for each command sent from the analyser. If I make any major changes, I'll let you know. Good luck and happy coding9a4db wrote:Plan is to put one RPI in between, two USB ports and translate/emulate your Trackgen
protocol to "language" known to ERASynth...
![Smile :)](./images/smilies/icon_e_smile.gif)
Reason: No reason
Re: RSP Spectrum analyser software available shortly
@Steve
Just to inform about first bump along the way
Arduino Virtual COM Port in Windows 10 Device Manager installation,
without Arduino HW is impossible mission so far.
Here have only RPI 2B+ available.
Must consider other way around
Like this COM1 created with trial version of http://freevirtualserialports.com
real working version is this one -> https://www.hhdsoftware.com/virtual-serial-ports / not cheap
In that case no RPI and my SW translator can run on PC.
So rather like to see some script language support on your future application, in way to run other signal generators...
73
Djani
Just to inform about first bump along the way
![Wink ;)](./images/smilies/icon_e_wink.gif)
Arduino Virtual COM Port in Windows 10 Device Manager installation,
without Arduino HW is impossible mission so far.
Here have only RPI 2B+ available.
Must consider other way around
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
real working version is this one -> https://www.hhdsoftware.com/virtual-serial-ports / not cheap
![Wink ;)](./images/smilies/icon_e_wink.gif)
In that case no RPI and my SW translator can run on PC.
So rather like to see some script language support on your future application, in way to run other signal generators...
73
Djani
Reason: No reason
-
- Posts: 213
- Joined: Thu Nov 16, 2017 11:06 pm
- Location: Gold Coast, QLD, Australia
Re: RSP Spectrum analyser software available shortly
As I understand it, are you are trying to use a virtual comms port to talk to the analyser, instead of using the Arduino ? You want to receive the analyser commands into your own software that drives the Synth ? Or have I misunderstood what you are trying to do ?9a4db wrote:Just to inform about first bump along the way
I use CSV List Browser which uses the Com0Com virtual port system. I'll have a quick look tomorrow and see if it's possible to do what you want.
You can get Com0Com here:
https://sourceforge.net/projects/com0co ... p_redirect
Reason: No reason