better alternative to Cubic SDR

General discussions
Post Reply
SDRnerd
Posts: 56
Joined: Sun Jan 07, 2018 6:29 pm

better alternative to Cubic SDR

Post by SDRnerd » Mon Jul 29, 2019 6:20 pm

Is there a better program that can connect to a Soapyserver or RSPserver that runs on Windows OS?
Any plans of SDRuno connecting to one of these servers in the future :?:
I'm a bit put off running Cubic SDR for a few weeks now. For me it has a huge lot of missing components and the, after the scene, AGC is awfull as is way to dial in a frequency besides that it has a lot of bugs like screen freezing etc :(

73' Ron
Last edited by SDRnerd on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

User avatar
mikeladd
Posts: 191
Joined: Wed Jul 08, 2015 3:18 am

Re: better alternative to Cubic SDR

Post by mikeladd » Mon Jul 29, 2019 7:40 pm

No, not that I know of. You can wait for SDRuno v1.4 or use SDR-Console which has a server/client already in place. I can't comment on the client/server function in console. I don't use it personally.

http://www.sdrplay.com/community/viewto ... f=6&t=4813

https://www.sdr-radio.com/Software/Version3/Server

Reason: No reason

SDRnerd
Posts: 56
Joined: Sun Jan 07, 2018 6:29 pm

Re: better alternative to Cubic SDR

Post by SDRnerd » Tue Jul 30, 2019 8:28 am

Mike,

I asked Simon (SDRconsole) a few weeks ago and his answer was negative. Later today I will hope to get the console server working from a W10 pc, but the goal was, as I do now, to get the SDRs servers working on a SBC running Linux.

I look out for SDRuno v1.4 somewhere in the future :arrow:


Thanks, Ron
Last edited by SDRnerd on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

sdrplay
Posts: 978
Joined: Wed Jan 07, 2015 7:58 am

Re: better alternative to Cubic SDR

Post by sdrplay » Tue Jul 30, 2019 9:14 am

HDSDR with the RSP TCP ExtIO plugin will work with the RSP TCP server

All available from our downloads page (https://www.sdrplay.com/downloads)

Best regards,

SDRplay Support

Reason: No reason

SDRnerd
Posts: 56
Joined: Sun Jan 07, 2018 6:29 pm

Re: better alternative to Cubic SDR

Post by SDRnerd » Fri Aug 02, 2019 10:26 am

Thanks for geting back on the thread.

Got the rtl_tcp server loaded on the Pi but when activating I get this reply:

libusb: error [udev_hotplug_event] ignoring udev action bind

detected RSP model 'RSP 1A' (hw ver 255)

listening...

Use the device argument 'rtl_tcp=127.0.0.1:1234' in OsmoSDR (gr-osmosdr) source to receive samples in GRC and control rtl_tcp parameters (frequeny, gain, …).

Whow can I resolve the libusb error and how can I enter my IP adress in rtl-_tcp?

Best regards,
Ron
Last edited by SDRnerd on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

SDRnerd
Posts: 56
Joined: Sun Jan 07, 2018 6:29 pm

Re: better alternative to Cubic SDR

Post by SDRnerd » Fri Aug 02, 2019 11:08 am

Hi,

Please ignore my previous message.
I got HDSDR running with the RSP_TCP server now.

Thanks for the assistance :!:

Best regards,
Ron
Last edited by SDRnerd on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

Post Reply