better alternative to Cubic SDR

[SDRnerd]

Is there a better program that can connect to a Soapyserver or RSPserver that runs on Windows OS?
Any plans of SDRuno connecting to one of these servers in the future
I'm a bit put off running Cubic SDR for a few weeks now. For me it has a huge lot of missing components and the, after the scene, AGC is awfull as is way to dial in a frequency besides that it has a lot of bugs like screen freezing etc

73' Ron

[mikeladd]

No, not that I know of. You can wait for SDRuno v1.4 or use SDR-Console which has a server/client already in place. I can't comment on the client/server function in console. I don't use it personally.

http://www.sdrplay.com/community/viewto ... f=6&t=4813

https://www.sdr-radio.com/Software/Version3/Server

[SDRnerd]

Mike,

I asked Simon (SDRconsole) a few weeks ago and his answer was negative. Later today I will hope to get the console server working from a W10 pc, but the goal was, as I do now, to get the SDRs servers working on a SBC running Linux.

I look out for SDRuno v1.4 somewhere in the future


Thanks, Ron

[sdrplay]

HDSDR with the RSP TCP ExtIO plugin will work with the RSP TCP server

All available from our downloads page (https://www.sdrplay.com/downloads)

Best regards,

SDRplay Support

[SDRnerd]

Thanks for geting back on the thread.

Got the rtl_tcp server loaded on the Pi but when activating I get this reply:

libusb: error [udev_hotplug_event] ignoring udev action bind

detected RSP model 'RSP 1A' (hw ver 255)

listening...

Use the device argument 'rtl_tcp=127.0.0.1:1234' in OsmoSDR (gr-osmosdr) source to receive samples in GRC and control rtl_tcp parameters (frequeny, gain, …).

Whow can I resolve the libusb error and how can I enter my IP adress in rtl-_tcp?

Best regards,
Ron

[SDRnerd]

Hi,

Please ignore my previous message.
I got HDSDR running with the RSP_TCP server now.

Thanks for the assistance

Best regards,
Ron