Search found 63 matches
- Tue Dec 20, 2016 4:53 pm
- Forum: General
- Topic: A lot of questions.
- Replies: 2
- Views: 9915
Re: A lot of questions.
ve2cjw, you might look at this presentation first. Enjoy, John.
- Sun Nov 13, 2016 2:34 pm
- Forum: General
- Topic: New install, SDRPlay not recognized
- Replies: 7
- Views: 21765
Re: New install, SDRPlay not recognized
KenHorse, I suggest you start with SDRuno. It brings the SDRPlay driver and all you need. Enjoy, John.
- Fri Oct 21, 2016 3:54 pm
- Forum: SDRuno
- Topic: AM Broadcast Band is Quiet
- Replies: 3
- Views: 14681
Re: AM Broadcast Band is Quiet
Alan1, I can tune several local AM stations for 590 - 1490 kHz. I am not good at getting the best audio and I am using just a short, about 12 cm, vertical inside. I think the best idea is for you to post screenshots of your Main and RX Control windows so others can make suggestions. Enjoy, John.
- Sat Oct 15, 2016 2:57 pm
- Forum: SDRuno
- Topic: undefined external error !!!!!!!!!!!!!!!
- Replies: 2
- Views: 13495
Re: undefined external error !!!!!!!!!!!!!!!
bubblegumpi, I strongly suspect that your new toy is not broken. I suspect Windows has lost contact with the HW. Have you tried unplugging and plugging your SDRPlay, power cycling your computer or at least restarting. I have seen this same message and it has always been easily corrected. Try having ...
- Fri Oct 14, 2016 11:59 pm
- Forum: General
- Topic: Install Question
- Replies: 3
- Views: 13099
Re: Install Question
WA2SQQ, SDRuno contains the DRIVER and all else you need to use the SDRPlay for normal listening. Unless you plan on using the Mirics HW or interfacing your SW with the SDRPlay, I don't think you need anything else. I installed all the stuff on the Start Here page on my DT but when I used my LT, I i...
- Tue Oct 11, 2016 8:24 pm
- Forum: SDRuno
- Topic: Multicore and GPU's ?
- Replies: 4
- Views: 17221
Re: Multicore and GPU's ?
Thanks, df1ech. You are correct, I did not watch my core usage. I assumed with SDRuno having 15-18 threads running that W10 would distribute the load fairly evenly amongst the 8 cores. I guess one thread could be doing all the heaving lifting thus loading one core while the other 7 did little. I wil...
- Mon Oct 10, 2016 11:46 pm
- Forum: SDRplay related
- Topic: stuttering audio
- Replies: 4
- Views: 15088
Re: stuttering audio
Thanks, Ron, that does help. I hate to denigrate your system, but it seems minimal at best. Did you try lowering your SR/BW? If so, did it get your CPU below 100% and stop the stuttering? From other posts here, it appears that HDSDR is easier on the CPU. Please try it again and reduce the SR/BW to t...
- Mon Oct 10, 2016 9:21 pm
- Forum: SDRuno
- Topic: Crash-Both SDRuno and my system!
- Replies: 0
- Views: 9518
Crash-Both SDRuno and my system!
After my testing last night (see here ), SDRuno fails and then my system crashed: https://s21.postimg.org/kuyr8qwg7/SDRuno_Crash.jpg Today SDRuno would not start, so I reinstalled it (1.04) and tried to start it which failed (some kind of out of memory error), then very shortly my system crashed. He...
- Mon Oct 10, 2016 8:45 pm
- Forum: SDRplay related
- Topic: stuttering audio
- Replies: 4
- Views: 15088
Re: stuttering audio
g4snu, please tell us more about your computer - architecture (32/64 bit) number of cores, clock, memory size. I recommend that you reduce the sampling rate (SR)/Bandwidth (BW) to the minimum needed to get your signal. If you will double click on the BW default value (2 MHz) on the main window enter...
- Mon Oct 10, 2016 3:50 pm
- Forum: SDRuno
- Topic: Multicore and GPU's ?
- Replies: 4
- Views: 17221
Re: Multicore and GPU's ?
I tried a similar test on my system: AMD FX-8350, 8 core running 4.1 GHz, 16 GB memory, W10 Pro x64. My results are different than df1ech. I cannot tell how SDRuno is working internally but I do see the thread count increasing as I start more and more receivers. I saw as many as 18 threads running. ...