make sdruono easier to read
Posted: Fri Jul 05, 2019 10:57 pm
Hi all,
does anyone have any tips/tricks to make sdruno easier to read
thanks Beau
does anyone have any tips/tricks to make sdruno easier to read
thanks Beau
SDRplay Community Forum
This forum is now suspended and will not accept any new posts or account registrations. For technical support relating to SDRplay hardware or software, please open up a support ticket via www.sdrplay.com/support
https://www.sdrplay.com/community/
make sdruono easier to read
Page 1 of 1
Re: make sdruono easier to read
Posted: Sat Jul 06, 2019 11:40 pm
You can try lowering your systems display resolution.
Re: make sdruono easier to read
Posted: Sun Jul 07, 2019 12:55 am
I forgot to add the following that SDRuno auto populates its panels based on preset resolutions. This is valid only for an unaltered "default" workspace.
Which is workspace 0
Try the following.
Lower your system resolution
Launch SDRuno
Select an unused Workspace from the MAIN panel. 1-9
You will only see the MAIN panel
Click the MAIN panel SETT. button.
Select the AUTO LAYOUT option
Select DEFAULT
SDRuno will now rebuild the panels based its preset resolution to match your system resolution
(as shown on page 21 of the SDRuno manual)
https://www.sdrplay.com/docs/SDRplay_SD ... Manual.pdf
Hope this makes sense
Which is workspace 0
Try the following.
Lower your system resolution
Launch SDRuno
Select an unused Workspace from the MAIN panel. 1-9
You will only see the MAIN panel
Click the MAIN panel SETT. button.
Select the AUTO LAYOUT option
Select DEFAULT
SDRuno will now rebuild the panels based its preset resolution to match your system resolution
(as shown on page 21 of the SDRuno manual)
https://www.sdrplay.com/docs/SDRplay_SD ... Manual.pdf
Hope this makes sense